Safety and security are hallmarks of the products we produce. The Safety Snap Cap was designed for safety and valve access security. This design affords easy access to the valve handle without having to remove the protective cap and replacing the regulators each time access to the cylinder is needed. This cap provides safety and security for the valve with the regulator attached. Once the cap is mounted to the cylinder and the regulator is attached, unauthorized access to the valve handle can be achieved by locking the cap into position. For day to day usage of the cylinder, the lock is removed, and the cap is opened for access to the valve handle.
The Construction Collar has been a staple of the construction industry for years. This economical proven design is used at construction sites around the world. The large openings provide the easy access to the valve and valve handle required by construction personnel while providing the safety necessary to protecting the valves from damage in the event of an accident.
Non-Magnectic Cylinder Caps
The non-magnetic cylinder cap is used to protect the valve during transportation of the cylinder. These caps are manufactured for both oxygen and acetylene cylinders with fine or coarse threading.
Standard Cylinder Cap
The standard cylinder cap is used to protect the valve during transportation of the cylinder. These caps are manufactured for both oxygen and acetylene cylinders with fine or coarse threading.
The Bayonet style cylinder cap was designed to accommodate oversize valves that would not or could not be protected by any standard size cylinder caps. The Bayonet cylinder cap is used in conjunction with an adapter ring that mates with the corresponding neck ring threads of the cylinder. The oversized thread of the Bayonet Cap provides the extra valve clearance and an increased measure of safety for the valve.
Plastic Valve Guards
Plastic Valve Guard is designed to provide valve protection, open access and ease of cylinder handling. This type of guard is primarily used on cylinders weighing less than 110 lbs. The guard is available in two different thread sizes & 4 different plain bore sizes to match OEM cylinders or ACC adapter rings for cylinders without neck rings.
Steel Valve Guard
The VG001 valve guard was developed to allow easy access to the valve with the additional protection of a halo strap, which also permits the handler to roll the cylinder. This design is used by gas distributors as a permanent replacement to the standard cylinder cap. The large openings provide easy access to the valve and valve handle, while still maintaining a high level of protection for the valve from damage in the event of an accident.
Cage Style Guard
The Cage Style Valve Guard was made to provide protection and access to a combination valve/regulator. Once the valve guard has been mounted in position, access for filling and general operation of the valve/regulator can be achieved without ever removing the cage. The Cage style valve guard mounts to the standard 3-1/8 or 3-1/2 size threads (high and low pressure cylinders). The guard is also available in different thread sizes, overall heights and cage configurations.
The Tulip Guard is designed for permanent or fixed use on the cylinder. Once mounted onto the cylinder, this guard provides strength for valve protection while allowing accessibility to the valve.